Product Review
In-line DSL filter
A DSL splitter is a standard telephone filter that allows multiple devices to be connected to one RJ11 telephone jack, including both DSLAM and PSTN devices.
In cases where it is possible to run new cables, it can be advantageous to split the telephone line after it enters the home, installing a single DSL filter on one leg and running it to every jack in the home where an analog device will be in use, and dedicating the other (unfiltered) leg to the DSL modem. Some devices, such as monitored alarms and Telephone Devices for the Deaf, mainly certain older models using an acoustic coupler, may be hardwired and may not easily accept a DSL filter. Some of these devices can be successfully filtered with a DSL filter or splitter, especially if the hardwired connection is converted into a jacked connection.
Case Size : 4.5*3*2(cm)
Cable Length :6(cm)
Power supply voltage is AC220V.
Package list :
2x In line DSL filter
- A DSL filter or microfilter is an analog low-pass filter installed between analog devices (such as telephones or analog modems) and a plain old telephone service (POTS) line.with their existing telephone (POTS) device,Also can be used for fax machines, answering machines.
- The DSL filter prevents interference between such devices and a digital subscriber line (DSL) service connected to the same line. Without DSL filters, signals or echoes from analog devices at the top of their frequency range can reduce performance and create connection problems with DSL service, while those from the DSL service at the bottom of its range can cause line noise and other problems for analog devices.
- RJ11 6P4C Male to 2 Female Telephone Modem ADSL Splitter Filter. A DSL splitter is just a regular phone splitter with a filter on one of the outputs. This allow the internet to work on your PC through the telephone. line (connected to the modem of course)
- Case Size : 4.5*3*2(cm) Cable Length :6(cm) Power supply voltage is AC220V. This device not accept full size Ethernet connector.
- Installation :Typical installation for an existing home involves installing DSL filters on every telephone, fax machine, voice band modem, and other voiceband device in the home, leaving the DSL modem as the only unfiltered device. For wall mounted phones, the filter is in the form of a plate hung on the standard wall mount, on which the phone hangs in turn.
