Product Review
QIJIE 4 pin LED light strip connector is a non-stripped solution to quickly connect waterproof 5050 RGB strip light to 4-conductor flat wire. No soldering, no stripping,no twisting. Just simply place waterproof tape light above the pin(no need remove waterproof coating)and press cap down, the pin will go through FPCB from back and contact copper layer.When connecting to wire, the pin can pierce the insulation of wire and contact the cable core inside. All this can be done with a pliers which means it can really free you from difficult and dangerous solering iron operation
1) LED Strip Type It Can Work With
- Normal RGB LED light strip with waterproof coating above diode
- Digital chasing LED strip like WS2813
- Other IP65/IP54 LED strip light 10mm with 4 solder pad
SPECIAL NOTE:This connector NOT for PURE SILICON waterproof coating LED strip light.Specific version for SILICON strip light, please visit --> https://www.amazon.com/dp/B01N9QXW04
2) Package Include
LED Strip Connector 4 Pin:10 PCS
3) More Options
- 5 PCS + 9.8 Feet RGB Wire --> https://www.amazon.com/dp/B01MZ3GAEZ
- 10 PCS + 40 Feet RGB Wire --> https://www.amazon.com/dp/B01N5OLABN
4) Tools Needed
A Clamp
5) Technical Data
Working Voltage:Below 24V
Max Current of Pin: 5A
Pin Quantity: 4 pin
Workable Wire Gauge: 22~20AWG / 0.34~0.54 mm²
Workable Strip Light Width: 10mm
Workable PCB Thickness:0.2~0.35 mm
Working Ambient TEMP.: -20~50℃
Heat Resistance:105℃
Connector Dimension: 24.3*14.6*7.7 mm
