Product Review

How to use this paintless dent repair kits?

1.Clean the dent with a clean wet cloth;
2.Mount the glue stick into the glue gun,pull the trigger to let the glue stick enter into the glue gun, connect the power source and preheat for 5 minutes;
3.Use a proper drawing gasket. Large dent requires a large drawing gasket. (Note: The larger the drawing gasket is, the larger the drawing force is);
4. Pull the trigger and apply the drawing gasket with extruded glue (The 4 holes of gasket should be applied with hot melt glue);
5. Fast place the drawing gasket with hot melt glue at the center of dent, press lightly until the glue cures and adheres (Let the glue cool for about 8 minutes. The cooling time should be less than 10 minutes and should be shorter slightly in winter);
6. Align the T-shaped repairer and press the drawing gasket with hot melt glue, pull the sliding rod backwards to pull up the dent;
7. Check with a Line board. If dent still exists, knock it slightly with a flattening hammer or pen;
8. Clean the repaired place with a clean wet cloth.

Package list:
1pcs dent lifter
12pcs black puller tabs
10pcs red puller tabs
5pcs blue puller tabs
4pcs yellow tabs
Note:

1.these items should be matched with glue gun and glue sticks to use.
2.When the glue is still warm,the stickiness is strongest.So please use the puller before the glue get cold.
3.If there are any questions,please feel free to contact us,we'll try our best to help you.