Product Review
Fit For:
2003-2010 Lincoln Aviator
1984-1992 Lincoln Mark 7
1982-2004 Lincoln Town Car
1998-2001 Mazda B2500
1994-2007 Mazda B3000
1994-2009 Mazda B4000
1991-1994 Mazda Navajo
1982-1990 Ford Bronco(Does not fit XLT Model)
1991-2007 Ford Crown Victoria
2007-2011 Ford Edge
2001-2010 Ford Explorer(2WD Models, Won't Fit Front Hub)
2003-2004 Ford Mach 1
1967-2014 Ford Mustang
1981-2011 Ford Ranger(Won't Fit Front Hub)
1996-2010 Mercury Mountaineer
Package Including:
2 wheel spacers + 10 wheel lugs
- COMPATIBILITY LIST INCLUDED : Wheel Spacers 5x114.3 to 5x114.3 hub centric Fit for 1980-2001 for Jeep for Cherokee |1986-1992 for Jeep for Comanche |1993-1998 for Jeep for Grand Cherokee |2002-2012 for Jeep for Liberty |1987-2006 for Jeep for Wrangler
- INSTALLATION WITH CONFIDENCE : Wheel Spacers 5x4.5 1.25in with Thickness:1.25",Vehicle Bolt Pattern: 5x4.5(5x114.3mm) ,Wheel bolt Pattern:5x4.5(5x114.3mm) ,Inner Diameter:71.5mm,Thread Pinch:1/2"x20；(Vibration can be avoided by simply following the recommended torque for installation, keeping the wheel adapters & spacers tight against the hub and Clean the rust of wheel and hub surfaces)
- SUPERIOR SAFETY AND STABILITY : Hubcentric wheel spacers 5X4.5 WHEEL SPACERS 1.25 inch - support and center the wheel to better resist impact loads from different road conditions and eliminate the risk of vibration.CNC automatic processing technology is used to ensure high precision and stability. The 10.9 stud can reach a tensile strength of 1000MPa, providing better structural support and safety.strict quality control, improve vehicle handling and stability, and prevent roll
- EXCELLENT DRIVING EXPERIENCE : Our 5X4.5 to 5x4.5 wheel spacers provide your car with an aggressive appearance while adding safety and stability to your car. It can effectively increase the wheelbase of the car, balance the center of gravity of the body, reduce body deformation, and solve the problems of drifting and tilting when the car is driving at high speeds and cornering at high speeds
- CHECK BEFORE YOU PURCHASING : 5 lug wheel spacers hub centric Even if a vehicle is listed as being compatible, buyers still need to check: 1) Wheel studs are 1/2 threads; 2) You have more than 1.25 inch of space between your fender and your wheel/tire; 3) Your factory wheel studs are shorter than 1.25 inch (NOTE: If your wheel studs are too long, you may need to grind/trim the stud down to fit); 4) Wheel center bore needs to be no smaller than 71.5mm,advise torque specs at 75-85 Ft/Lbs
- INSTALLATION TIPS FOR YOU : The use of a thread lock adhesive is encourage for Manufacture.The back of the wheel must sit flush on the wheel spacers/adapter.The studs on the vehicle cannot stick past the face of the the wheel spacers/adapter. If they do,you may need to modify by grinding/trimming
