Product Review

Feature:
Pads protect the hull finish
Heavy Duty construction
Gently cradles and supports your valuable kayaks
Wide mouth J bar offers easier loading and unloading
Optimally sized J style carrier leaves roof space
Quick on/off hardware ensures fast installation and removal
Fit most factory or aftermarket round,square,oval and flat crossbars
Assembly steps:
1. Slide the plastic blocks onto the shorter U-tube section, and push the block all the way on so the legs of the short U-tube stick all the way through.
2. Insert the legs of the longer U-tubes (smaller) into the openings of the shorter U-tubes, then slide the plastic block back to align the openings with the holes in the U-tubes.
3. Insert a carriage bolt, add the large bottom plate, then your washer and nyloc nut. The plastic block is pliable enough to manipulate in order to get the head of the carriage bolt to align, just push and pull a bit.
4. Press on the head of the carriage bolt while tightening the nut, and it should rotate and allow the square shoulder to drop into the square holes of the tube.
5. Don't tighten the first bolt down, but rather get the other three carriage bolts inserted with the washers and nuts started.
6. Once you get all four in-place, then you can go ahead and tighten them all.