Product Review
Gomexus Power Knob G45
Direct Fitment For
1,Shimano Reel Handle B
2,Penn Clash Conflict 5000-8000 Reel Handle
3,Abu Revo Toro Beast Reel Handle
Drill Fitment For Most Of Reels Branded Above 5000
1,Please make sure your handle has enough meat for a hole of 0.238",
2,Use 1/5" or 15/64" drill bit to drill a hole on your handle, according to the shaft supplied,
3,Please use a smaller bit to drill the rivet off first, then expand the hole with the bit according to the drilling bit above,
4,Fasten the shaft supplied to the handle, secure the fastening with thread locker, like blue locktite,
(5,Use the extra long screw supplied, in case your handle is too thick, like spinfisher,
6,Use the bearing with less height, if the knob can not spin freely after installation; or back off the screw a bit, (after it fasten the knob on the shaft), secure the fastening with thread locker.)
- 【Material】Gomexus power knob is made of aluminum cold-forged, much stronger than Eva or rubber stock knobs; super smooth and comfortable which you never feel【Size】1.77"/45mm【Weight】1.44oz/41g【Accessories】1 stainless steel shaft, 2 stainless steel bearings, 1 aluminum bushing【Warranty】1 Year(bearings and accessories not under warranty)essories not under warranty)
- 【Bigger size fit for heavier spinning reel】Fits tightly, spins well with smooth bearings. Really suitable for fishing that pulls a lure with high resistance or uses it with great force. 45mm/47mm aluminum round power knob is a great fitment for offshore saltwater fishing and jigging. It helps you catch saltwater and freshwater species you want to, such as tuna, yellowfin, and so on.
- 【Control easily】By changing to this power knob that fits in your hand, control performance improved better than original knob, you will not get tired even if you wind it all day long, round shape and gripping power handle make it easier to interact with fish【Please note】Compatible models are not limited to the following explanation, so if you have any questions, please contact us.
- 【DRILL FITMENT for Daiwa/Penn spinning reel】Daiwa BG, Penn Battle II 5000 - 8000, Penn Spinfisher, Penn Slammer 6500 7500 Spinning Reels【Direct Fitment for Shimano spinning reel】Socorro SW, Thunnus Ci4, Spheros SW, Saragosa SW, Twin Power SW, Stradic FK 5000, Stella SW saltwater spinning reels; Also direct fit for Penn Clash 5000 6000 8000. PLEASE NOTE: This product cannot be replaced directly, only drilling.
- 【Easy to Install】Take 5 minutes to directly install or 15 minutes to cut and drill【When need to drill】The original knob which is fastened by rivet need to drill【Drill tips】The hole size need 6mm, You need to start with 4mm bit first, Then expand the hole to 6mm by a 6mm Bit; with accessories supplied, as per picture 6, please refer picture 5 for drill bit selection
