Product Review

NOTE: Do NOT connect this switch to ceiling fans, motors, or home appliances. Use with lighting only.
NEUTRAL WIRE REQUIRED


SPECIFICATIONS:
• Model Number: ZEN24 VER 3.0
• Z-Wave Signal Frequency: 908.42 MHz
• Power: 120 VAC, 60 Hz
• Minimum Load: 15W for LED and CFL bulbs
• Maximum Loads: 500W single, 400W 2-gang, 300W 3-gang Incandescent, 150W CFL or LED
• Z-Wave Range: Up to 100 feet line of sight
• Operating Temperature: 32-104° F (0-40° C)
• Installation and Use: Indoor only


Will it dim my bulbs?
You'll be able to adjust brightness levels between 10% and 100% (with full on/off capability) for the following popular dimmable LED bulbs:

• Amazon Basic
• BROADA
• CMYK Edison Style
• CREE
• Ecosmart
• GE
• Halo
• Philips
• Sunco
• Sylvania
• Utilitech Recessed Dimmable LED's
• Utilitech Dimmable LED's

Manual Operation:
• Click the toggle up to turn on the light to the last brightness level. It takes around 3 seconds for the dimmer to reach full brightness. The ramp rate is not adjustable.
• Click the toggle down to turn off the light (with a fade-out effect and 3-second ramp rate).
• Press and hold the toggle up to add more brightness. Press and hold it down to reduce brightness.
• After power failure, the switch will automatically turn on to the last brightness level.
• In a 3-way installation, the slave (mechanical switch) can only turn the light on or off. The slave switch will always turn the light on only to the last brightness level. Dimming is only available from the master Zooz switch and your Z-Wave software.