Product Review
1.LED Strip Connector Package Include
5 PCS LED Strip Connector Terminal 8mm 2 pin non-waterproof
9.84 Feet / 3 Meter 20 Gauge 2 Conductor Extension Wire UL Listed
1 PCS User Manual
2.Special Benefit you can get with it.
You will be no more limited by distance between strip light to power supply or dimmer. This connector allow you to cut any length wire according to project's actual requirement, then attach wire to connector easily without stripping insulation.
With 2 connector and a wire, you are able to diy a strip-to-strip-jumper wire in order to extend strip light with any angle or direction. The length of this jumper wire can be decided by you fully.
No more worry strip light moving out of connector, the connector's teeth will pierce and grip the PCB tightly.
3.Tools needed to use
A pliers only
4.How to use (2 mode) 4-1 How to make a Strip-To-Strip-Bridge connector ?
- Cut a wire for the length you want
- Insert wire into connector's wire end
- Clamp cap down
- repeat step 1-3 to add another connector to the wire
4-2 How to make a Strip-To-Power connector
- Cut a wire for the length you want
- Insert wire into connector's wire end
- Clamp cap down
5.Technical Data Working Voltage: <=24V
Max Current of Pin: 5A
Pin Qunatity: 2 pin
Workable Strip Light Width: 8mm
Workable PCB Thickness:0.2~0.35 mm
Working Ambient TEMP.: -20~50℃
Heat Resistance:105℃
- Non-waterproof and Silicon Waterproof only, Not for PU or Epoxy waterproof--Connector's pin can penatrate PCB from Strip Light's BACK to connect, applicable for both NON-WATERPROOF and SILICON (NOT PU,NOT Epoxy) COATING WATERPROOF 8mm 2 Pin strip light.Workable to strip light with 3M VHB foam adhesive tape that can not be inserted to common white snap connector
- Attach wire by yourself, allow you to DIY both strip to strip jumper and strip to power pigtail that are up to 9.8 feet / 3 meter long, in order to make extension and angle connection according to project requirement. NO NEED to solder,strip,twist or tape the wire
- Clear cover and optimized design to better work with 120 SMD per meter strip light(SMD3528/ SMD3014/ SMD2835 /SMD2216),it doesn't block light of first SMD closed to the connection points
- Stable and safe enough for 3.5A current carrying in 5V,12V and 24V tape light by optimizing pin shape(more contact points),using high precision copper,using flame retardant housing and using real UL listed 20AWG wire (surface tin-plated copper,silver colored conductor)
- The 5 terminals have wire end and strip end for splicing strip light to wire. Be sure you place strip light and wire correctly, if not sure, pls refer to images carefully showing in this page. For SILICON COATING WATERPROOF, you don't need to peel the silicon layer, the cover can still close like non-waterproof strip light
