Product Review

Healthy and environmental protection: the fingers do not need to touch the gel remover, and the remover can reuse.

Specification:

Color:White
Voltage:110-240v
Product size:6.3''L*3.9''W (L16*W10cm)
Body material: hard plastic;
Size: Height about 10 cm , fuselage bottom diameter of about 16 cm, cover mouth about 12 cm in diameter, carton 20 cm.

Operation steps:

1.Open the top cover of the steamer machine.

2.Pour 5-10ml Gel removal solution into the white bowl (Please ensure the bowl contacts the bottom of machine for heating up normally).

3.Use nail file filing the top coat lightly (If you file off top coat of gel prior to steaming,it lessens your steam off time tremendously).

4.Turn on the power switch,the "H"light on,after a while(2mins)"S"light on,you can put your fingers into the top cover (Please don't take the fingers out of the holes during steaming).

5.After 5 minutes, it beeps, after 10 minutes, it beeps again, the "W"light on and the steam finishes a cycle at the moment,you could take the fingers out.

6.Use nail push remove gel polish quickly for avoiding it get dry again(within15secs is better),switch off the machine after you finished

7.It maybe take an extra cycle to get all the polish off if necessary,do exactly the same with the steps.

Warning:
New machines, you sometimes have to cycle them a few times before they get really warm. sometimes after 4 cycles it was warming up really well. So if you try it and you don't think it's doing anything, cycle through the heating up process a few times.

Products include:
gel remover machine, the power cord, steam cover, finger isolation cover, fingers separate cover skin, nail polish remover vessel, operating instructions(not included gel removal solution, nail file and nail push)