Disclaimer: As an Amazon Associate I may earn from qualifying purchases
- Input Voltage: AC110V
- AC frequency:47-440HZ
- Cold Surge Current:<=60A(AC220V Input);<=30A(AC110 Input)
- Current Leakage:<=0.7mA(AC220V Input); <=0.4mA(AC110V Input)
<...
Product Review
- Input Voltage: AC110V
- AC frequency:47-440HZ
- Cold Surge Current:<=60A(AC220V Input);<=30A(AC110 Input)
- Current Leakage:<=0.7mA(AC220V Input); <=0.4mA(AC110V Input)
- Maximum Input Voltage:DC 30KV; DC 5V;DC 24
- Maximum Output Current:DC 25mA;1A;1A
- Efficiency:>=90﹪(full load)
- Mean Time Between Failure (MTBF):>=20000H
- Response Speed:<=1ms(from the switch Signal is given to the output current up to 90% of the setting current)
- Control Interface:TTL level switch control (details refer to the control terminal specification)
- Pressure-proof:Input-Output, Input-Shell: AC1500V 10MA 60S
- Protection:can work in open-circuit condition for a short time (Require a good protective earthing and avoid arc between the positive and the machine shell)
- Operating Temperature：-30~65Celsius, Relative Humidity (RH):=<90﹪
- Cooling Way:Natural air cooling
- Dimension:L*W*H=167*144*97(mm)
- Specificity: It is designed exclusively for Engraving Machine and can be applicable to 50W laser tube of a number of manufacturers. Powerful Features and High Integrity: It makes the high-pressure laser power supply, driving control board and the auxiliary power of drive motor integrate in one board, so as to reduce external lead and strengthen the anti-interference ability.
- Advanced Technology: The power adopts Soft Switch Technology, so dramatically increase the efficiency of the power supply, boost reliability of the power supply and also lengthen service life of laser. High Security: The input and output of power supply are separated completely to avoid getting an electric shock.
- Easy Control: The start and stop of laser can be easily controlled by TTL level. And there are protection switch to test the external water, ventilation, etc. Easy Control of Laser Power: The laser power conversion can be controlled by a potentiometer.
- The power supply has the function of open circuit protection.
- The power supply can take feedback interface which can be used in closed-loop control and testing the working current of laser. The power supply adds a new function, that is timely scene judging which part is damaged, laser tube or laser power. Application: Engraving, seal-cutting, etc.
