Product Review

Method for replacing a new screen：
1 - Get the bottom scews out use the plum screwdriver
2 - Get screen out a little bit with the suction tool. The tool should de placed slightly above the home button.
3 - Enlarge the interspace Use the suction tool to lift open the scree. Be gentle,cause thete is FPC right under the home button.
4 - Remove the metal plate which used fasten the FPC for the screen. Firstly you need to get the scews out (As pic shows)The last picture of the product.
5 - Cause the scews 'size is different,so please mark down the cor esponding place for each scew.
6 - Take off the protection cover.
7 - Unclench the screen ribbon cable. ipeone 5 sereies has 3 connectors
8 - The screen is separated from the motherboard
9 - Get the bottom scews out. Take off the protection cover
10 -Unclench all sensor ribbon cable. lnclude Earphon、Range sensor and light sensor.
11 - Get the bottom scews out.Take off the protection cover. Unclench touch ID sensor ribbon cable.
12 - Get the touch ID sensor out.
13 - Get the two side of the screen fixed screws out.
Please Note
1 - Installation, there is the length of the screws to pay attention to.
（1）The First long Screw (2) The Second long Screw (3) The third long Screw (As pic shows)The last picture of a commodity
2 - Install the wrong will cause the screen damage, we are not responsible for such errors.
What do you do not understand, please contact us, we serve 24 hours for you.