Product Review
DIY repairs like the pros
✔ Rim can remain attached to the car during the repairs
✔ Special filling compound is heat-resistant up to 130° C
✔ Car rim remains vibration- and car wash-proof after repairs
The 13-part repair set contains:
- 1 x transparent rim kit (contents: 6gr., reclosable)
- 1 x Alu Silver-Metallic Varnish 5ml
- 2 x alcohol cleaning cloths
- 1 pair of rubber gloves
- 1 x file
- 2 x plastic spatula
- 2 x brushes
- 2 x cotton swabs
- with 1 x extra detailed and multilingual user manual
The perfect look in just a few steps:
1. Smooth any unevenness with the rough sandpaper, clean off all dirt, and sand the spot with the fine wet sandpaper.
2. Press the required amount of repair filling into a suitable container, fill the damaged spot with the trowel, and let the mass harden for about 20 minutes.
3. Afterwards, level the contour to the rim with the sandpaper (first rough and then wet with the fine sandpaper), rub the sanded spot dry with a clean cloth.
4. Apply the rim lacquer with the touch-up stick. After 1 to 2 hours, you can operate your vehicle again (your rims will be fully resilient again after 2 to 3 days).
Note:
Read the instructions carefully before use.
