Product Review

Specifications:
Channel: 7Channel output
Modulation: DSM2/DSMX
Band: 2.4GHz
Dimensions (W x Lx H):21.5*15mm
Weight: 0.9g(case not included)
Voltage Range:3.3V
Antenna Length Main RX:13.5cm(2)
Remote ControlRange:500M(tested with JR DSX9)

Compatibility (Spectrum and JR DSM2/DSMX): DX6I,DX7,DX8,DSX7,DSX9DSX11
Binding Procedure
I. Press the binding button and connect power to receiver.Transmitter in Bind model. LED quick flash , when binding completed LED will turn off. Reconnect power to receiver, LED will go steady, now receiver is ready to fly.
Receiver LED will change from rapid flashing to slow flashing and a few seconds later led go solid means successful binding.Failsafe should be programmed correctly
IV.Restart the receiver by cycling it power off and turn on and connect battery into BIND channel is recommended. All channels should function properly now. You may test fail-safe by holding sticks in corner, cycle transmitter on and off. Surfaces and throttle should return to your preset fail-safe positions.

Other parts you might be interested:
5.8G fpv receiver for Android phone http://www.amazon.com/dp/B06ZZG6GSR
5.8G FPV receiver for iphone/ipad/Android www.amazon.com/dp/B0741T9DT8
Self-binding Micro DSM2 DSMX receiver http://www.amazon.com/dp/B01NAEN5RG http://www.amazon.com/dp/B01JWFCRYA
5 Inch 800*480 400lux LED Monitor http://www.amazon.com/dp/B01K1U7LU0
Dual Module BN-880 GPS http://www.amazon.com/dp/B01EG53470
1.5W Super Bright LED Head Lights http://www.amazon.com/dp/B019FD678G
4mm thick 210 Frame http://www.amazon.com/dp/B06XXH6JXG https://www.amazon.com/dp/B07219Q4TX http://www.amazon.com/dp/B071WVNFMM
F450 frame https://www.amazon.com/dp/ B016OBSW08
25mW/ 100mW / 200mW Switchable AIO FPV Camera http://www.amazon.com/dp/B06Y6G19FQ