Product Review
Specifications:
Thickness:30mmThick
Vehicle Bolt Pattern:5x120mm
Wheel Bolt Pattern:5x120mm
Thread Pinch:12x1.5
Inner Diameter:72.56mm
Shank length:60mm
Seat Type:Cone Seat
Compability:
1 SERIES (E82, E88) - 128i, 135i, M1, 1M COUPE
3 SERIES (E30) - M3
· 3 SERIES (E36) - 318i, 318is, 318ti, 325i, 325is, 328i, 328is, M3
· 3 SERIES (E46) - 323ci, 323i, 325ci, 325i, 325xi, 328ci, 328i, 330ci, 330i, 330xi, M3
· 3 SERIES (E90, E91, E92, E93) - 325i, 325xi, 328i, 328xi, 330i, 330xi, 335d, 335i, 335is, 335xi, M3
· 5 SERIES (E28, E34) - 525i, 528e, 530i, 535i, 535is, 540i, M5
· 5 SERIES (E60, E61 2004-2010) - 525i, 525xi, 528i, 530i, 530xi, 535i, 535xi, 545i, 550i, M5
· 6 SERIES (E24, E63, E64) - 633i, 635i, 645ci, 650i, M6
· 7 SERIES (E23, E32, E38) - 730i, 730il, 733i, 735i, 735il, 740i, 740il, 750i, 750il
· 8 SERIES (E31) - 840ci, 840i, 850ci, 850i
· 1996-2002 Z3 (TYPE RC)
· 1998-2002 M-COUPE/ROADSTER (TYPE MRC)
· 2003-2009 Z4 (E85, E89)
2006-2008 Z4 M COUPE/ROADSTER (M85)
2000-2003 Z8 (E52)
Note:
Your Factory wheel studs may extend past the surface of the wheel spacers. In this case you will need to:
1) Shorten the factory studs
2) The wheels need to have the open slots (cavities) between mounting holes.
3) Purchase a set of shorter studs and replace them with the factory studs.
What's in the box:
2 Wheel Spacers + 10 Wheel Lugs
- [GARAGE CHECKING]:For this 30mm Wheel Spacers 5x120,please verify the bolt count,bolt circle diameter,center bore,and bolt size match your vehicle before ordering.Enter your Year/Make/Model in system garage filter(AMAZON CONFIRMED FIT)to validate product fitment
- [PARAMETER]:this Wheel Spacers 5x120 to 5x120 with Thickness:30mm inch| Vehicle Bolt Pattern:5x120| Wheel Bolt Pattern:5x120| Thread Pitch:12x1.5| Hub Bore:72.56mm | Recommended Install Torque:70-80 Ft/Lbs| Package Include:2 pcs Wheel Spacers with Thread locker glue
- [PERFORMANCE]:(1)Increasing the extra gap between tire and vehicle hub assembly,improving the vehicle's performance in terms of handling and traction ,such as improve flexibility when turning.(2)Giving an aggressive performance to your vehicle.(3)Lowering the center of gravity,benefit for keeping stability at a h-igh speed.(4) Av-oid rubbing on the sway bar when install larger tires
- [INSTALLATION]:Please Make sure that your Vehicle hub bolts size MUST equal to this Wheel Spacers'thread pitch 12x1.5.Requires standard tire repair tools, a torque wrench, and lug socket.Check and re-torque all hardware, including open-end lug nuts securing adapter to wheel hub after some 50-100 miles
- [LUG BOLTS DESIGN]:While 12.9's are stronger but less ductile which is an issue in a failure scenario. Pre-installed heat treated 10.9 grade studs are more appropriate in the sense that they have higher plastic strain energy, or in simpleton terms: will tend to deform rather than snap.10.9's are more than sufficient for a car application in terms of strength and for the reasons mentioned above are more desirable than 12.9's
