Product Review

The nail drill can be used for natural nails as well as artificial nails Perfect for professional or home use This tool is design for carver, engrave, rout. Grind, sharpen, sand, polish, drill.

Collets type: 2.4mm
Voltage:110-240V 50/60Hz
Size: 16cm(L) x 2.4cm(Diameter of handpiece)
Weight: 174g
Manicure drill machine length: 15.5cm
Cable length: 75cm
Variable speed control: 18000 RPM up to 20,000 RPM

How to use:
Unplug the tool form electric outlet before loading a bit
Press shaft lock button, use the collet wrench to loosen the collet nut. Insert the bit, and tighten the collet securely,. But avoid excess tightening of the collet nut and never use the damaged bit.
There is an off/on switch. When the switch is on, the tool runs at 20,000rpm.
There is a switch indicator with an orange line on it. Slide the switch to find the speed needed form 18000 to 20000rpm.
Slide the switch to black dot for complete stop.
When finished, turn off the tool and unplug it.

Attention:
Always unplug the tool when you change accessory.
Do not use near or place in water. If motor falls into water, unplug immediately.
Do not reach into water.
Do not touch the bit after use.
The bit is too hot to be touched by bare hands Keep dust out of eyes and lungs by using protective eyewear or a dust mask Always unplug it after use.
When the machine is not is use, all tool must be stored in a dry location abd keep out of children.