Product Review

DIY Electric Roller Blind / shade tubular motor kit (Remote control  included)

Features

Suit for All 30mm tube of roller shutters Soft gauze shade, peacock shade, etc.

How to reset the motor

1. Clear the code.

Press the red Learning button on the motor for 6 seconds, the motor would sound a slow "dididi", keep on pressing and do not release until the motor sound a quick "didididi". Then you have successfully cleared the code.

2. Match the code.

Press the motor learning button for 6 seconds, the motor would sound "dididi", release the button, immediately press C key on the back of the remote control to match the code(note:The C key should be pressed for less than 1 second,the motor would sound a "dididi").

3. Set the trip.

First press the L key on the back of the remote control for 6 seconds, the motor has a beep tone, if you want to set the down trip, press the down button on the remote control, and press the stop button when the motor run to the position you need, and then press the C key on the back of the remote control, then the down trip has successfully been set.

Press the up button on the remote control, and press the stop button when the motor run to the position you need, and then press the C key on the back of the remote control, then the complete trip has successfully been set.

If there is still any questions, please do not hesitate to contact us.We will do our best to solve your problem.