Product Review

NOTE: 1.Make sure your section of LED strip lights are 12mm wide 5 PIN Non-Waterproof LED Strip.
2.Should peel off covered silicon on the surface around soldering line area, if you want to connect 5Pin WATERPROOF LED light strip

Solderless Wire Joint Quick Splice Connector for 20-18awg Cable
Our products were an innovative safe and quick wire connector, peeling free, tapping free and twisting free. well waterproof and dust proof function. it greatly changes the way of wire connection .it allow any users to just insert the wire into wire joint and press cover by pliers to connect the wire safely and conveniently.
Installation TIPS:
Strip End:
1. cut the rgbw led strip straight perfectly, then fully open the clip.
2. push the led strip in until it hits the backing, and pins on the connector make contact, and press hard down for several times with nose pliers to make sure the PINS puncture through led strips.
Wire End:
1. have to be separated the 5 wires(20 gauge wire) before you insert them into the rgbw connector.
2. required to press down hard for several times with nose pliers! Ensure the contacts pierces through the insulation on the wire as there are so many non-standard wires on the market!
3. reminder: no stripping of the wires. Just be sure polarity nodes are matched up "+" to "+" and "-" to "-".
If you have any problem about installation, pls feel free to contact me.

Package:
10pcs Strip to Wire Connectors (AC-SE-N10XB-5)