Product Review

Key Features:
Improving the link quality and coverage of certified WLAN devices.
Working with certified IEEE 802.11a/an wireless Lan devices
The max input trigger is 20dbm, if inputting over 20dBm, the product may can not work or get over-heated
3dB ultra-low noise, 6V to 16v operating input voltage range

Specification:
Frequency range : 5.725~5.8Ghz
Operating voltage : 6~16V
Receiving gain: 15dB +/- 1
Transmission gain : 20dB +/- 1
Input trigger power : Min 3dBm Max : 20dBm
Maximum output Power : 37dBm (5W)
EVM : 3%29dBm 802.11a 54Mbps OFDM 64QAM BW 20Mhz
DC supply current : 700mApout 29dBm 12V
Noise figure: <3.0dB
TX/RX switch time delay : 1us
LED indicator : Transmitter : Green, Receiver : Red
Dimension : 82x50x21mm

Application:
Wireless Lan 802.11a/an access point clients
Based on the 5.8ghz WLAN Wireless base stations
Based on the 5.8ghz WLAN wireless bridges
Indoor distribution systems (multi-play) in the combiner
Based on Zigbee, bluetooth protocol wireless device

Installation instructions:
Step1: disconnect poweer supply to AP/Router
Step2: Detach the antenna from your certified wireless AP/Router
Step3: Connect RG316 cable ( included in the package) to the booster and AP/Router
Step4: Connect the antenna to the other end of the booster
Step5: Connect the power supply to the booster first and subsequently the AP/Router
Package include:
1x WiFi Signal Booster
1x 9V 1A Power adapter
1x 20cm RG316 Cable
1x 5dBi Antenna
1x Manual