Product Review

Monitor your garage, gate, driveway or doorway with the Seco-Larm Enforcer Photoelectric Beam Sensor (50 ft.). This weatherproof sensor triggers an alarm in a connected security system when its infrared (IR) beam is broken. The 3-inch round reflector can be installed discretely on a wall or other flat surface. It provides a large sensing area for wide entryways, as well as easier alignment during installation. This sensor also features lensed optics and dual-color LEDs to strengthen the beam and minimize false alarms due to rain, snow, falling leaves, birds, etc. FEATURES: Up to 50-foot sensing range (sensor to reflector). Suitable for indoor or outdoor use. Weatherproof with sunlight-filtering case. Near immediate response time from 10ms. Includes installation hardware. SPECIFICATIONS: Type: Reflective photoelectric beam sensor. Sensing Range: Up to 50 feet (15m). Operating Voltage: 12~30DC/ADC, 100mA. Current Draw: Standby: 55mA at 12VDC Active: 40mA at 12VDC. Response Time: 10ms. Light Source: IR LED. LEDs: Solid Red: No beam signal, triggered. Alternating Flash: Poor beam signal. Solid Green: Good beam signal, properly aligned. Alarm Output: NO/NC relay, 0.5A at 120VAC, min. 1s. Tamper Switch: NC switch, 500mA at 30VAC/VDC. Alignment Angle: Horizontal: +/-90 degrees; Vertical: +/-15 degrees. Enclosure: Weatherproof IP55. Operating Temperature: -13F to 131F (-25C to 60C). Dimensions: 3-3/16 x 7-3/16 x 3-9/16 inches (81 x 182 x 91 mm). Weight: Sensor: 11.6 ounces (329g) with hood. Reflector: 5.9 ounces (167g) with hood. Approvals: ISO 9001, CE, RoHS. Warranty: 1 Year.