TAC-9 Inner Tube - 27 x 1-1/4" SV 32mm. 27" diameter by 1-1/4" width will fit any tire that is within these dimensions. It has a reinforced regular schrader valve 32mm in length. For use on but not limited to kids youth bicy...

Buy Now From Amazon

Product Review

TAC-9 Inner Tube - 27 x 1-1/4" SV 32mm. 27" diameter by 1-1/4" width will fit any tire that is within these dimensions. It has a reinforced regular schrader valve 32mm in length. For use on but not limited to kids youth bicycles, Strollers, trailers, recumbents or any tire with the same tire dimensions. Our butyl inner tubes with reinforced Schrader valve stems are top quality tubes at an affordable price. Each of our tubes are quality controlled for defects. We 100% guarantee it! PLEASE READ, VERY IMPORTANT: This applies to ANY brand of tube. To avoid a tube explosion (caused when a tire is not properly beaded/hooked to the rim) we strongly recommend incremently adding air to a completely flat tire (such as when changing an inner tube). Add ONLY about 15 psi and then inspect the bead or hook of the tire to the rim all the way around AND on both sides. You should see a line on the tire for a reference which should be approximately the same distance from the rim all the way around. If not then you need to re-seat the tire into the rim to ensure it is completely beading / hooking to the rim. Otherwise the tire could slip off the rim, at the point where the tire isn't seated properly, allowing the inner tube, that has air pressure in it, to force it's way between the tire and rim to the outside which would very likely cause the tube to explode. Most people want to blame it on a defective tube but the tube cannot explode if it's contained within the tire and rim. It can only explode when it rapidly slips out between the tire and the rim. It's simple physics! :o)

  • 2 Pack - Tube Size - 27" x 1-1/4" (ISO 630) w/ 12mm Rubber Rim Strips
  • Valve Type - 32mm Schrader Valve with Reinforced Base (see images) and Black Plastic Cap. Valve is removable.
  • High Pressure - Will handle any pressure as stated on your tire.
  • RIM STRIPS: 12mm Rubber (SEE IMAGES)
  • INFLATION - Slowly and incrementaly add air to a complete flat to ensure the bead is hooking onto the rim completely. To avoid a "popped" tube please follow inflation instructions when airing a tire from a complete flat.

Similar Products

Kenda k35 Gumwall Sidewall 27 x 1-1/4" Road Bicycle Tires Wire Bead - PAIR (2 TIRES)TAC 9 Two Pack - 27x1-1/4" Bike Tire, BONUS Tube and Rim Strip - Select Gum Wall or Black WallBell 27-Inch Road Bike Tire with KEVLARDia Compe 76 Grey Matter Brake Pads (Bag of 4), GreyContinental Ride Tour City/Trekking Bicycle Tire, 27x1-1/4CST C638 HP Wall Wire Bike Tire, Black, 27"Kenda K36 Gum Wall 90psi Wire Bead Tire, 27X1 1/8-Inch