Product Review
Extra remote control for EKYLIN Remote Battery Switch Disconnect System DC 12V
Please notice that: the additional remote is not preset to pair with the current receiver, you need follow the steps to pair the remote control with the receiver :
1. Hold the pairing button until the red indicator light on. (See photo 2)
2. Then press the remote control button (any one of on / off), the reciever will learn the signal code and pair with it.
3. If the red indicator light is off, then the pairing is ok.(The previous remote control can still work because the receiver can save upto 20 remotes' codes)
Package Includes:
1 x Remote Control with Battery Included
- Extra remote control for EKYLIN Remote Battery Switch Disconnect System DC 12V
- Please notice that: the additional remote is not preset to pair with the current receiver, you need follow the steps to pair the remote control with the receiver :
- 1. Hold the pairing button for 5 seconds to re-set the receiver working mode. While holding the button for 5 seconds, don't release the button until the red light flash 3 times. This is to set the working mode for 2 button control mode.(very important)
- 2. Hold the pairing button (less than 5 seconds) until the red indicator light on. Then press the remote control button (any one of on / off), the reciever will learn the signal code and pair with it.
- 3. If the red indicator light is off, then the pairing is ok.(The previous remote control can still work because the receiver can save upto 20 remotes' codes)
