Product Review

Note:
The Input Voltage could not be higher than 5V!

Operating Instructions:
Same way to operate the SH channel bottom of the remote as the switch of transmitter's module.
*The factory 200mw (LED blue), Long press 5 seconds switch to 25mw (LED RED). "L "stands for 25mw and" H "stands for 200mw on the screen.
*Long press 3 seconds to switch FR/CH.
*Short press to choose the frequency.

Setting of SH channel bottom of the Remote:
*At "Frsky X4R"receiver's 3 channel and sbus remote module's 4 channel will be same channel for output at the same time.
*Need to enter mixer page of Frsky, using copy function to send 4 channel backward, example, send backward channel 1 to channel 2, and so on.
*After sending channel backward, the extra channel will need to be deleted. The CH1 is for the bottom to control transmitter.
*Connect F3 adjustable parameter software, enter the ground station, the channel may be mess up. Please enter command page of the ground station, to revise the right channel and save it for proper working.
*Use CH1 channel port of "X4R",the order is 1AETR234.
*With PMW remote mode, having one channel from SH output channel is ok to use.
*Above setting is similar with the other remote controller.

Basic Data:
Transmission Frequency: 5.8Ghz
Transmission Power: 25-200MW
Frequency point: 40CH
Transmission distance: 1000M
Input voltage: 5V
Antenna connector: SMA Hole
Working current: 500mA/5V
Operating temperature: -10-85℃
Video Format: NTSC/PAL
Video Broad band: 8M
Weight: 5.82G

Package Contents:
1 x DYS Mi200 transmitter

If for any reason you are unhappy with any product, please do not hesitate to contact UAV-parts. We take full ownership and responsibility for the quality of our products and will do our very best to solve your problem quickly and efficiently!