Product Review

Features:
1.Solar energy charge.
2.With no memory effect and a long service life.
3.Imported high brightness led chips,to avoid accidents while driving at night and to decorate.
4.While driving at night, flashing function can be activated with the help of light-control and micro-vibration sensor system.
5.It will shut down automatically 30 seconda after parking.

Use:
1.In the dark, press the button 4-5 seconds after the opening, and one more time press the button 4-5seconds you can shout down.
2.Mode selection, press the button can change the light flashing mode.

Mount:
1.Remove with a small screwdriver to the car logo
2.Measure the numerical value of clamp diameter for the logo
3.Use a screwdriver to loosen the clamp pin diameter positioning screw
4.According to the measurement of the diameter, average adjustment of four cards, and then tighten the four screws
5.Measuring height value card foot original logo
6.According to the measured height of the card's foot, the position should be inserted into the slot in which the positioning buckle is inserted. The long side near light
7.The spring card in four pin buckle in the medial , intermediate position feet, in order to ensure the card pins.
8.Put thte products into the position of the original logo
9.complete

Attention
1.please charge more than two hours in the sun before use
2.When using this product ,please put the car outdoor for charge,pay attention to both sides of the sun;
3.Regular cleaning solar panel surface, in order to ensure normal work
4.Please tighten all screws, firm installation products to avoi the product off the wheel to rotate at high speed.
5.The RED button press hardly,you need to Press hard.