Description:
Motor type: Bipolar Stepper
Motor Length: 40mm
Phase Resistance: 1.5Ohm
Phase Inductance: 2.8mH
Detent Torque: 2.2N.cm
Rotor Inertia: 54g.cm2
Holding Torque: 40N.cm
Motor W...

Buy Now From Amazon

Product Review

Description:
Motor type: Bipolar Stepper
Motor Length: 40mm
Phase Resistance: 1.5Ohm
Phase Inductance: 2.8mH
Detent Torque: 2.2N.cm
Rotor Inertia: 54g.cm2
Holding Torque: 40N.cm
Motor Weight: 280g
Step angle: 1.8 deg
Step angle accuracy: + - 5%(full step, not load)
Resistance accuracy: + - 10%
Inductance accuracy: + - 20%
Temperature rise: 80deg Max(rated current, 2 phase on)
Ambient temperature -----------20deg ~+50deg
Insulation resistance: 100MΩ Min, 500VDC
Insultion Strength--------500VAC for one minute

Warning:
Make sure the motor connect to a constant current or chopper drive controller before you test motor. Connecting the motor directly to a power supply will destroy the motor.

Connection:
Yellow(A+), Green(A-), Red(B+), Blue(B-)

Package include:
5x Nema 17 Stepper Motor

Similar Products

OctagonStar Flexible Couplings 5mm to 8mm NEMA 17 Shaft for RepRap 3D Printer or CNC Machine(2PCS)eTopxizu 12v 30a Dc Universal Regulated Switching Power Supply 360w for CCTV, Radio, Computer Project URBEST Inlet Module Plug 5A Fuse Switch Male Power Socket 10A 250V 3 Pin IEC320 C14M3 Alloy Steel Hex Socket Head Cap Screws Nuts Assortment Kit, Allen Wrench Drive, Precise Metric Bolts and Nuts Set with Beautiful Assortment Tool Box for 3D Printed Project, 310 Pcs (Black)HiLetgo RAMPS 1.4 Control Panel 3D Printer Control Board Reprap Control Board Support Arduino Mega 2560URBEST AC 250V 5A SPDT 1NO 1NC Momentary Hinge Roller Lever Micro Switches 3 Pins 10 PcsBIQU A4988 Compatible Stepper StepStick Motor Diver Module with Heat Sink for 3D Printer Controller Ramps 1.4(Pack of 5pcs)UEETEK 10pcs 3D Printer Stepper Motor Cable Lead Wire HX2.54 4 pin to 6 pin 1MWINOMO Nema 17 Stepper Motor Mounting Bracket w/ M3 Screws 2 PackGT2 Timing Belt Pulley, 8pcs 5mm 20 Teeth Timing Pulley Wheel and GT2 5 Meters Rubber 2mm Pitch 6mm Wide Timing Belt with Allen Wrench for 3D Printer CNC by Beauty Star