Product Review

Note:
1.The new screen replacement have only two flex cables, you should transfer the front camera sensor flex cable and finger sensor flex cable from your old screen, so total four flex cables.
2.Our instruction only for reference, you should better search some relate videos before starting, it is more clear and easy-following.

If your phone meet some problems like cannot turn on,touch insensitive, flash, lines on screen etc, please follow below steps:

1.Please check the LCD to make sure the flex cables are in good condition and there are no debris on the connectors.
2.Disconnect and reconnect the flex cables from the motherboard side.
3.Then Reboot: Hold buttons (Home, Up volume, and Power button) untill the phone switch down and then switch up again.
4.Leave the phone alone for a while in a dry environment. Sometimes there is static after installing that will go away after some time. Please leave phone alone overnight and see if this problem persists in the morning.

Installation:
1.Please check the appearance and flexes connectors carefully when receive it to confirm whether there is appearance breakage or damaged, Any problems, Please do not hesitate to contact us and provide photos for the problem, we will resolve for you soon.
2.Please make sure you are a special repair technician, because it is not an easy job to repair the screen.
3.We are not responsible for any incorrect operation of yourself.
4.Do not bend the cables in the wrong way.

Package include: 1x LCD Digitizer Assembly for iPhone 6 4.7" black 1x Repair tool kit