Product Review

Roadstar Every A/C compressor is 100% tested before shipping out, the compressor wheel will not make a noise, the magnet can work normally and the compressor does not leak.

Fitment: Fit for

2006 Jeep Liberty 65th Anniversary Edition/Renegade Sport Utility 4-Door 3.7L 226Cu. In. V6 GAS
2006-2008 Jeep Liberty Limited/Sport Sport Utility 4-Door 3.7L 226Cu. In. V6 GAS
2008 Jeep Liberty North Edition/Sky Slider/SE Sport Utility 4-Door 3.7L 226Cu. In. V6 GAS
2007-2008 Dodge Nitro ATX/SLT/SXT Sport Utility 4-Door 3.7L 226Cu. In. V6 GAS
2007 Dodge Nitro MTX/SLT Premium Sport Utility 4-Door 3.7L 226Cu. In. V6 GAS

Replacement steps:

Please do the following steps before changing the compressor:
(1)Separate and clean all pipes in the system, pour the cleaning agent into the condenser and evaporator and soak for about 20 minutes.Then use high-pressure nitrogen to flush the cleaning agent and dirt out of the pipes. Do not clean the compressor dry bottle, liquid accumulator and the throttling tube. And ensure that there is no residual cleaning agent in the system. If necessary, run through the pipe with nitrogen desiccant.
(2)Clean the surface of the condenser and evaporator and check whether the cooling fan speed is normal.
(3)Clean or replace of the expansion valve, pipe filters and drying bottle must be replaced.
(4)Checking and calibrate the oil filling capacity and viscosity before install the compressor.
(5)Before installing the compressor, please vacuum and then filling with refrigerant and check the high and low pressure. Generally, the normal pressure is 180-200psi and the low pressure is 30-40psi. If the pressure is abnormal, please diagnose the reason and restore it