Product Review
The 3 way distilling thermometer adapter has a compression cap to form a vacuum tight seal of plain thermometer on top. With two 24/40 inner joints at bottom and side, and the two joints are at a angle of 75 degree. Laboy glass are all made of high-quality borosilicate glass and made by hand-blowing to ensure uniform wall thickness.
- 3-way distilling head with thermometer port – Glass 3-way thermometer adapter that combines a distilling head and thermometer adapter in one piece, with 24/40 lower and side standard taper joints arranged at about a 75° angle for compact distillation setups.:contentReference[oaicite:7]{index=7}
- The lower and side 24/40 joints connect flask and condenser – The bottom 24/40 inner joint is usually connected to a distilling column for fractional distillation or a distilling flask for steam or vacuum distillation, while the side 24/40 inner joint connects to a Liebig or West condenser below about 150 °C or an air condenser above 150 °C.:contentReference[oaicite:8]{index=8}
- Compression cap thermometer joint – Threaded opening at the top with compression cap and O-ring to form a vacuum-tight seal around a plain-stem thermometer or bleeding tube, allowing accurate vapor-temperature measurement or pressure control in the distillation head.:contentReference[oaicite:9]{index=9}
- Hand-blown borosilicate 3.3, high-temperature annealed – Made from high-quality borosilicate glass 3.3 with heavy-wall construction and high-temperature annealing to relieve internal stress; all joints use the standard 1:10 taper and are interchangeable with other 24/40 glassware of the same outside diameter.:contentReference[oaicite:10]{index=10}
- Protective individual packaging – Each 3-way thermometer adapter is individually packed in a protective inner box with cushioning material before shipment, helping the glassware arrive intact and reducing the chance of breakage during handling or FBA fulfilment.
