Product Review

Note:
When [Main Flash Control Key] switched to "S",the flash on the flash connecting side is TTL and have can achieve high speed sync. The flash on the camera connecting side is treated as slave which has no TTL and high sped sync.
When [Main Flash Control Key] switched to"M",the flash on the camera connecting side is and have can achieve high speed sync. The flash on the flash connecting side is treated as slave which has no TTL and high sped sync.
1. Make sure the camera and flash are powered off before installing the Keibe.
2. As an electronic accessory this may be affected by rare environmental causes. Normal working operations should not be affected by this.
3. Drops or shocks will lead to product failure.
4. When not in use for long duration, please turned off the transmitter and the receiver's power and remove the battery.
5. The batteries should be installed correctly. Reverse polarity may cause batteries to leak corrosive liquids, heat or explosion.
6. When connecting the cable with the device, do not pull directly on the wires.
7. Do not store in a high temperature, such as an enclosed car under direct sunlight, the dashboard and other high- temperature areas.
8. Keep dry, do not contact wet hands with the product. Do not immerse in water or exposed to rain as this may lead to failure of the device.
9. Do not use near flammable gases. Failure to follow this warning may cause explosion or fire.
10. This product includes batteries; please strictly follow the instruction for proper operation. Failure to follow this may cause explosions, fire or personal injury.

Package list:
1*3.6 M flash off camera cord
1*manual
If you don't know if our product is suitable for your camera,please e-mail us.