Complete 65.6 Foot Music Color Chasing LED Strip Light Kit, 24V 20 Meters Waterproof Flexible Addressable RGB LED Tape Light Works With SP107E Support iOS Android, For Home Decorations

Product Review

A set of solderless 3 pin led tape light connector with 3 meter hook up wire (Red-White-Yellow insulation) together. Now your lighting project will be no more limited by distance between strip light to power supply or dimmer. You can freely cut any length wire according to project's actual requirement, then attach wire to connector easily without stripping insulation. With 2 connector termial and a wire, you are able to diy a strip-to-strip-jumper wire in order to extend strip light to any angle or direction. The length of this jumper wire can be decided by you fully.

1) Workable Strip Light

All IP20 rated 10mm dimmable LED strip light (cct)
Non-waterproof 10mm dual color led tape light with 3 solder pad
Only PURE SILICON coating waterproof dimmable led strip

2) What's Included

3 Pin Terminal Connector for non-waterproof: 5 PCS
20 Gauge 3 Conductor extension falt Wire (red-white-yellow): 3 meters / 9.8 Feet

3) Tools Needed

A pliers
A scissors to make works more efficient (cut wire and strip light)

4) Specification

Working Voltage: <=24V (DC 3,5,12 Voltage )
Max Current of Pin: 5A
Pin Quantity: 3 pin
Workable Strip Light Width: 10mm
Workable PCB Thickness:0.2~0.35 mm
Working Ambient TEMP.: -20~50℃
Heat Resistance:105℃

NOT for PU / Epoxy cover waterproof--With 9.8 Feet 3 conductor flat wire ready, you can DIY both strip-to-strip-bridge(jumper) and strip-to-power-lead connector wire that is up to 3 meter long, no stripping or soldering needed
Just place strip light or wire above connector's pin, then press cap down by pliers, connection will be done well. Easily connect your dual color led strip to dimmer or controller
Powerful with as much as total 5A current supported, allow you to connect longer LED strip by one connector,reducing cost and connection work
At strip end the pin will go through PCB from strip light back, at wire end the blade will pierce the insulation, so connector can grip strip light and wire tightly,never worry them getting out of connector. Even workable to strip light with 3M VHB red foam adhesive tape
Applicable for non-waterproof dimmable(cct) SMD3528 /3014 /2835 /2016 strip light in different LED density ranging 30~120 LEDs per meter

Track Price :: Reviewing Millions of Products!

Nicelux CCT Tunable LED Strip Connector 10mm 3 Pin (5PCS) With 9.8 Feet 20 AWG LED Extension Wire, DIY Both Strip to Power and board to board Jumper, Non-waterproof

Product Review