Product Review
Product Parameters:
Working voltage: DC12V
Delay timing range: 0.1 seconds(min.) to 999 minutes (max.), adjustable
Signal source: Positive side of power supply triggering, Button, PNP sensor, PLC signal
Output ability: Can control the devices within DC 30V 5A or AC 220V 5A
Quiescent current: 20mA
Working current: 50mA
Service life: More than 100,000 times
Working temperature: -40 to 85 ℃
Dimension: 64.2*34.8*18.5mm
Product Features:
Output adopts optocoupler isolation, which enhances the capacity of resisting disturbance power consumption.
Industrial level circuit board
The set parameters will be memorized forever even after power off.
Note: The output of the relay is passive contact, which output without electricity and control on/off of one circuit.
4 Modes:
â—P-1: Signal triggering, the relay connects. When time is over, the relay disconnects. During the delay time
â—P-2: Signal triggering, start timing time T1. When T1 time is over, the relay connects. Then when T2 time is over, the relay disconnects (reset)
â—P-3: Recycle: when T1 time is over, the relay connects and then when T2 time is over, the relay disconnects, infinite loop. The value of T1 and T2 is adjustable.
If the value of pull in or disconnecting is 0, it can turn off the infinite loop of delayed connecting or delayed disconnecting when power on.
â—P-4: If there is signal triggering, the relay connects and keeps connecting. When the signal is disappeared, start timing. When the time is over, the delay disconnects.
During the delayed time, trigger the signal again, delaying stops, the delay keeps connecting. When the signal is disappeared, re-timing again.
