Product Review

This is a 12V DC Single Touch Dimmer.
Optional Single and Double Switch
Up to 40 Watts to Used with Single or Multi-lights
Comment Use with LED Lights, Incandescent and Halogen bulbs
Touch - On/Off
Hold - Dim/ Bright
FCC Approved Dimmable Driver
Quality warranty: 3 years
Finish: Black
Dimension for Single Dimmer(inch): 2.6 x 1.6 x 0.6
Dimension for Double Dimmer(inch): 3.2 x 2.6 x 0.6

CAUTION
This dimmer is only for 12V DC , 50 watts maximum LED loading
ELECTRICAL CONNECTIONS
Connect white wire(s) with "IN-" mark from the dimmer to the white (neutral) wire of the supply circuit.
Connect black wire(s) with "IN+" mark from the dimmer to the black (live) wire of the supply circuit.
Connect white wire(s) with "OUT-" mark from the dimmer to the white wire(s) of LED lamps.
Connect black wire(s) with "OUT+" mark from the dimmer to the black wire(s) of LED lamps.

At the circle of center of about 3 / 8" round circle area, is the better touching area.
TOUCH INSTRUCTION
A.When the dimmer is connected, the indicator light begins to work, and will be at OFF status.
B. For turning on the light, land a short click on the dimmer pad. For turning off, do it again.
C. For dimming after turning on, keep the finger on touch pad, so the brightness will dim from low to high, or vice versa, and after reaches the highest or lowest brightness, it will start dim again.
For turning off after dimming, leave the finger from touch pad for more than 1 second and touch again.
D. At the OFF status, keep the finger on touch pad, the lights will be dimming from low to high.
E. The dimmer has a memory function. When the light turns on, the brightness will be at the status of the last time when it was turns off.