4PCS Servo Motor MG995 Control Angle180 Metal Gear Servo 20KG Digital High Speed Torque Servo Motor for Smart Car Robot Boat RC Helicopter

Product Review

Miuzei SG90 9G Micro Servo Motor Kit for RC Robot Arm Helicopter Airplane Remote Control

Product Specification
Mode Number：MS18

Control Specification：
Control system:Change the pulse width
Amplifier type:Analog controller
Operating trave:l120°±10° (900→2100 μsec)
Left&Right travelling Angle deviation:≤ 6°
Centering deviation:≤ 1°
Neutral position:1500 μsec
Dead band width:7 μsec
Rotating direction:Counter Clockwise (900→2100μsec)
Pulse width range:900→2100 μsec
Maximum travel:About 120° (900→2100 μsec)

Apply Environmental Condition：
Operating Temperature Range:-10℃～50℃
Operating Voltage Range:4.8V～6.0V

Electrical Specification (Function of the Performance)：
Operating speed (at no load) 0.09±0.01 sec/60°(4.8V ) 0.08±0.01 sec/60°(6V)
Running current (at no load) 400±30mA (4.8V ) 500±30mA(6V)
Stall torque (at locked) 2.0±0.20kg·cm (4.8V ) 2.2±0.20kg·cm(6V)
Stall current (at locked) 1300±40mA (4.8V ) 1600±50mA(6v)
Idle current (at stopped) 6±1mA (4.8V ) 6±1mA(6v)
Running life(at no load) >350000 Turns(4.8V ) >320000 Turns(4.8V )
Temperature drift(at 25°C) ≤5°C(4.8V) ≤7°C(6V)

Mechanical Specification：
Limit angle:200°± 1°
Weight:9 ± 1 g
Connector wire gauge:＃28 PVC
Connector wire length:250 ± 5 mm
Spline:21T
Horn type:Cross,star and bar-type
Excessive play:≤0.5°

Appearance Inspection：
Dimensions:L23xW12.2xH29mm

If there any problem or concern with our product when you get it, you could reach out to us and write message about your issue via Amazon mail:https://www.amazon.com/ss/help/contact/?_encoding=UTF8&marketplaceID=ATVPDKIKX0DER&ref_=v_sp_contact_seller&sellerID=A34CQKEVNF2MJX

SG90 9G digital Servo - Miuzei 9g servo motor for remote control helicopters, micro robot, robot arm and boats. Fit for ALL kinds of R/C Toys and also make electronics DIY compatible with Arduino, Raspberry Pi.
Mini Servo - small servo motor compatible with JR and Futaba interface. Micro servo running speed (at no load) : 0.09 sec/60° (4.8V) 0.08 sec/60°(6V). Running angle: 180 degree.
Micro Servo Motor - Stall Torque (4.8V): 19.6 oz /in (1.4kg/cm). Dead band width: 5 usec. Operating Voltage: 4.8V-6.0V.
Application Fields -Servos used for fixed-wing, helicopter, KT, glider, small robot, robotic arm and other models.
Note - Starting current of the analog servo motor should be over 1A and servo sg90 are analog servos need to continuously provide a PMW signal, then it will be work normally.

Track Price :: Reviewing Millions of Products!

Sg90 9g Micro Servo Motor, Miuzei Mini Small Servos Motor Kit Metal Gear for Arduino RC Car Airplane Robot 10 Pack

Product Review