Product Review

Operation steps

1.Check if all the necessary accessories are complete,and install them as the picture shows
2.Put the container(beaker,flask...) onto the center of round plate,add liquid/solution into the container and put the stirring bar into it
3.Plug in the power cord,turn on the power button,indicator light will be on
4.Choose/set the proper heating temperature you need
5.Turn the rotary knob marked with “Speed adjust" to adjust stirring speed;please adjust speed from lower to higher(Starting with high speed is not allowed,thus avoid stirring bar jumping at random)
6.Machine start to work

Package includes:

1 x the whole machine
1 x magnetic beads
1 x instruction
1 x power line
1 x alloys pole
1 x alloys ten byte
1 x rubber chuck

Attentions:

1.This machine must be clean and dry,any liquid mustn't come inside the machine
2.If the stirring bar doesn't stir or jump,please check whether the beaker is stable,whether the position is right
3.Working at medium speed will lengthen the lifetime of this machine
4.Please connect ground wire before using

Note:The temperature value showing on screen is the actual temperature of probe stick on machine,not the temperature of hotplate,please put the probe stick into the liquid you mix.