Product Review

Instructions:
Digital temperature Thermostat is one of latest developed thermostat which are widely applied to aquarium, reptile market, incubators, green house,refrigerator etc, places where is requited constant temperature, one channel is for temperature controlling(heating or cooling)

Main Functions and Parameters:
- Temperature controlling range:16~40℃
- Temperature measuring range:40~110℃
- Resolution: 0.1℃; Accuracy:±1.0℃
- Input: 1NTC sensor
- Relay: 10A/220V(standard); 16A/220V(optional)
- Product consumption:≤ 3W
- Input voltage :110Vac±15%(standard), 1100Vac±15%(optional)
- Ambient Requirements: Temperature:-10~60℃ :Humidity: 20%~85%℃
- Output: resistive load≤ 1100W/220V, inductive load≤ 275W/220V, filament lamp≤ 220W/220V

Two Working Mode (Cool & Heat)
Cooling Mode：If Measured Temperature ≥ (setting temp. + temp. difference), the cooling process will operate. Otherwise, the cooling process will stop.
Heating Mode: If Measured Temperature ≥ (setting temp. + temp. difference), the heating process will stop. Otherwise, it will start.
Q&A:
Q1: How to switch between HEAT/COOL mode?
A1: Press H/C Key to switch the mode between HEAT and COOL in normal working status.
Q2: How to set up DIFF (Temperature Difference)?
A2: Press SET Key in normal working status to display the default DIFF value while icon DIFF flashing, then press UP or DOWN Key to adjust the ideal temperature difference you want.
Q3: How to set up DELAY (Compressor Delay)?
A3: Press SET Key to display the default DELAY value while icon DELAY flashing, then press UP or DOWN Key to adjust the ideal compressor delay time you want. Then press SET to save and exit.
Q4: How to set up the temperature?
A4: Press UP or Down Key in normal working status to display the default stop temperature value while icon ℃ flashing, then press UP or DOWN Key to adjust the ideal stop temperature you want.