Product Review

Penobon Electronic Pet Training Mat for Dogs Cats

Three optional training modes:

• Tone: Sound alert and very very low electric shock, you can test the mat with your hand at this mode.
• TONE+STATIC: Sound alert and normal electric shock.
• STATIC: Normal electric shock only, no sound alert

Please Note:

1. If there is too much hair or dirt on the pet paws, it would insulate your pet from the pet mat, your pet would not be shocked on the mat.

2. When you turn the mat on, in the first 1 minute, the mat would calibrate itself, there is no any shock when you touch it. After the minute, the mat would work normally, you can press the Action/Button to switch the working mode.

3. There are two metal wires on the mat (These are visible upon close inspection, separated by about 1 inch), when a electrical conductor is touching across the two wires, the mat would send a static pulse to shock it.

4. Please read the instructions carefully before use which is attached with the mat.

How to Use:

1. Install a 9V battery correctly. (NOT included)

2. Short press the Action/Button to turn it on, the LED indicator would light up and flash once every 5 seconds.

3. Wait about 1 minute, the mat would calibrate itself.

4. After the minute, short press the Action/Button to switch the working mode. You can check the mat with your hand directly at the TONE working mode.

5. Long press the Action/Button about 3 seconds until the LED indicator flash some times quickly. If you hold it too long, it would be turn on again.