Product Review

Manufactured By Atomic Market

This bracket is to simplify your gameboy zero build. When you modify the origional gameboy case you will need to cut out the top two mounts that hold the front and back case together. This piece will go in with no measuring and gets it right every time! These will come in assorted colors shipped at random. Its inside the case so it really does not matter :)

The screw holes will be a little tight the first time you insert/remove the screws (this is because the screws tap the screw holes themselves). It might be helpful to partially insert/remove the screws once before gluing it down. You should *not* need to drill into the bracket to make the holes looser.

Do not over-tighten the screws! This is pretty tough plastic, but just like on the original screw posts, if you over-tighten it can strip the screw holes or worse, you could make the screw go through the bracket completely and damage your screen. In my testing I never had that happen, but I stopped tightening when the case was nice and firmly closed.