Product Review

Vacuum Sealing Function
Please press the VAC SEAL button, the blue indicator light will turn on. Then press the START/STOP button to initiate vacuumizing. The heat sealing function will automatically start up. Once the procedure is completed, the machine will automatically stop.

Half-vacuum Sealing/Non Vacuum Sealing Function
Press the MAN SEAL button first, then press the START/STOP button begin to seal. When the red and blue indicator lights flashing alternately, press the START/STOP button again to stop the machine.

Note: You can control the air pressure inside by controlling the sealing time

Air Suction Function
There is a hole by the side of vacuum chamber. Connect the hole with a vacuum tube with external preservation container. Press the Canister Switch begin to vacuum.

Note: In emergency, the ongoing vacuuming can be stopped by pressing the START/STOP button.

Product Specification
Product name: Vacuum Sealer
Model number: VS-M1
Material: ABS, PC
Vacuum degree: -40KPa/-60KPa
Voltage(V)/Frequency(Hz): 100V～240V, 50Hz/60Hz
Power(W): 130W
Decibel: ≤50dB
Vacuum sealing operating time: 10-20 Seconds
Non-vacuum sealing operating time: 6-15 Seconds
Sealing bag in width: No More Than 30cm(11.81")
Product dimensions: 357mm*148mm*73mm(14.06"*5.83"*2.87")
Product weight: 1500g(3.31lb)