Mighty Max Battery 10 Watt Polycrystalline Solar Panel Charger for Deep Cycle Battery Brand Product

Product Review

Our advantages:

1.This solar power regulator protected with the moisture-tight coating, minimizing damage from humidity and from nesting insects.Â
2.Dual USB place at both ends of the terminal.it will be better than Dual USB in the same place for dissipate heating,prolong the controller life.supply power to two mobile phones, tablet PCs, and other devices that require 5V power.Â

specifications:

*MAX charge and discharge current:20A
*MAX input power and voltage:240W/23V(12V)
*USB output:Dual USB output,5V/2.5A(MAX)
*Equalization:14.4V
*Float charge:13.7V(default,adjustable)
*Discharge stop:10.7V(default,adjustable)
Â *Discharge reconnect:12.6V(default,adjustable)
*Charge reconnect:13V
*Size/weight: 5.86*2.87*1.3in/0.44lb
X2All green color voltage x2 while using 24V system

Safety Instructions:

1. When installing for the first time, please make sure the battery has sufficient voltage so that the Charger controller can recognize the normal battery type and system.
2.Make sure the input power and voltage don't exceedÂ 240W/23V(12V battery) and 480W/46V(24V battery).
3. Install the Charger controller to the battery as close as possible to avoid voltage and power dropping caused by overlong wire and affect normal voltage judgment.
Â 4. Charge Controller should connect the battery first, and then connect the solar panel, and finally the load! The disassembly sequence is contrary to the wiring order
5.Connect the inverter (DC / AC) to the battery. Do not connect to the solar controller.
6.The LCD display has an error of 0.2 V- 0.3 V, but this is normal
7.The controller will stop output when the battery under 10.7V(adjustable).and it will re-output when the battery up to the 12.6V(adjustable)..
8.Do not open the heat sink of the solar controller without permission.

Package Includes:Â

1.1 x 20A Solar Charge Controller
2.1X English User Manual

❶ 20A SOLAR CHARGE CONTROLLER: Rated Discharge Current: 20A; Battery Voltage: 12V/24V auto.Adjustable power rate with dual USB, 4-Stage charging(Boost, ABS, Equalization,Float) charge management.This solar charge controller can simultaneously charge or supply power to two mobile phones, tablet PCs and other devices that require 5V power
❷Power-off Memory Function - backlight LCD display PV/Battery/Load charge and discharge parameter. like the fourth picture, adjustable Floating voltage/LVD/LVR/Timer according needs. Automatically memorize various parameters set by the user, unexpected power failure can be stored.
❸ This solar charge controller fit for Lead-acid batteries (OPEN,AGM,GEL) with mutiple load timer. Load should be DC. For protecting the lifespan of your battery, once the voltage of the battery drop below 8V, the solar controller will turn off automatically.
❹ Intelligent Safety Electric Protection - overcharge protection, overdischarge protection, Dual MOSFET anti-backflow protection, overheating protection, Under-voltage discharge, effectively ensure the system stability and more safe for home, industrial,commercial etc.

Track Price :: Reviewing Millions of Products!

Solar Charge Controller 20 amp - PowMr Solar Panel Battery Controller 12V 24V,Dual USB Adjustable Parameter Backlight LCD Display and Timer Setting ON/Off Hours Solar Regulator(20A)

Product Review