Disassemble stubborn U-joints in minutes with the ABN Sealed U-Joint 1.5" to 2.2" Inch Cup Puller Removal Tool for Spicer Meritor Rockwell Class 7 & 8 Truck & Machinery. This puller is the mule of pulling U-joints for bearin...

Buy Now From Amazon

Product Review

Disassemble stubborn U-joints in minutes with the ABN Sealed U-Joint 1.5" to 2.2" Inch Cup Puller Removal Tool for Spicer Meritor Rockwell Class 7 & 8 Truck & Machinery. This puller is the mule of pulling U-joints for bearing cups from 1.5" to 2.2" inches and will fit nearly all Class 7 and 8 trucks and machinery. Using this safe method removes rusted and corroded bearings easily without damage to the U-joint's driveshaft, yokes, joints, or bearing cups. It is designed for use with up to 1" inch impact wrenches and is compatible with all Spicer drivelines 1610, 1710, 1760, 1810, 1880, Spicer SPL 140, 170, and 250, "Life Series" Meritor (Rockwell) 16N, 17N, 18N, 1710 Meritor RPL 20 and 25 "Premalube" Series. WARNING: This product can expose you to chemicals which is [are] known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

  • PRACTICAL FOR U-JOINTS: The ABN Sealed U-Joint 1.5” to 2.2” Inch Cup Puller Removal Tool for Spicer Meritor Rockwell Class 7 & 8 Truck & Machinery quickly and easily removes sealed U-joint cups
  • NO DAMAGE, NO DANGER: Removes rusted and corroded bearings easily and mechanically without damage to the U-joint components (driveshaft, yokes, joints, or bearing cups); Eliminates dangerous vice and socket method and hammering method
  • HEAVY-DUTY BRUTE STRENGTH: Engineered for use with up to 1” inch impact wrench providing the ultimate strength for disassembling drivelines; Approximate 7 Ton (6.4MT) capacity
  • EASY TO USE: Disassemble stubborn U-joints by pulling until you hear a “pop” noise; As with any puller, use in conjunction with lubrication if it is not able to force the part free on its own; Remove a stubborn bearing cap with lubrication or heat applied to the yoke; While a new U-joint will break free with an impact tool, frozen parts are best set free by hand tools
  • FITMENT: Fits U-joint bearing cups 1.5” to 2.2” inches and will fit nearly all Class 7 and 8 trucks and machinery; Compatible with all Spicer drivelines 1610, 1710, 1760, 1810, 1880, Spicer SPL 140, 170, and 250, “Life Series” Meritor (Rockwell) 16N, 17N, 18N, 1710 Meritor RPL 20 and 25 “Premalube” Series

Similar Products

OTC 7075 Transmission Output Shaft End Yoke RemoverLisle 19852 Truck and Trailer Wheel PanOTC 5192 Heavy-Duty Bearing Cup InstallerKen-Tool 34645 Automotive AccessoriesSunex 533MD, 1 Inch Drive, 33mm Deep Impact Socket, Cr-Mo Steel, Radius Corner Design, Chamfered Opening, Dual Size MarkingsLang Tools 4651 Automatic Slack Adjuster Release Tool and WrenchDOT-C2 2"Inch X 150'Feet Red/White Reflective Tape - for Vehicles,Trailers,Boats,Signs30 pcs Straight Push Connectors Plastic Quick Release Connectors Air Line Fittings for 1/4 5/16 3/8 Tube (Two Way)Tire and Tube Patch Auto Repair Stitcher by SteelmanLang Tools 7578 7/16" Automatic Slack Adjuster Wrench, 7/16"