Product Review

What printing experience was brought by Ultra base? Watch the video to find What has been bought to us by Ultra base. How to assemble the Ultra base platform: Ultra base has the same installation holes (209*209mm) as the standard MK2 and MK3 hot bed, and it's compatible with almost all 3D printers with MK2 and MK3 hot bed. Just peel off the blue tape on the backside, and then fit the Ultra base to the hotbed (base). for assembly video Attention: * Suggested bed temperature may vary depends on the filament material; * Please properly level the bed before printing; * Never let the nozzle rub against the Ultra base directly; * Clean the platform surface with alcohol/water. Temperature settings for different filaments: 1. PLA:50-70℃ 2. Flexible filament: 50-70℃ 3. ABS:100-125℃ ( 110℃ is recommended ) 4. PC:100-130℃ ( 120℃ is recommended ) 5. Nelon:90-120℃ ( 110℃ is recommended ) 6. PP:100-130℃ ( 120℃ is recommended ) 7. PETG: 50-70℃ Ultra base Specification: 1. Material : Special Glass + microporous coatings + Heat bed 2. Item size : 220*220*5.5mm 3. N.W :750g 4. G.W :870g 5. Box size : 26.5cm*26.5cm*5.5cm Heat bed Specification: (1)Material: Aluminum base (2)Voltage: 12V/24V (3)Max Temperature:120 Degree Celsius (4)Dimensions:220mmx220mm (5)Thickness: heat bed 1.5mm (6)Resistance around 0.9 ohm for 12V (7)Resistance around 3.6 ohm for 24V (8)100 Degree Celsius suggested for both 12V and 24V Package List: 1x ANYCUBIC Ultra base 3D Printer Platform with Ultra base heat bed 4* M3X35 Screws 4*M3 nuts 4* spacers.