Product Review
Package include:
4 x TB6560 MD430 single axis driver
4 x 23HS8430B stepper motor 76mm 270oz-in dual shaft
1 x 350W 24V DC switching power supply
1 x 5 axis breakout board
1 x DB25 parallel cable
1 x USB cable
English user manual for breakout board and stepper motor driver will send by email. TB6560 MD430 Low noise of stepper motor driver
1. Introduction
MD430 is a compact single axis bipolar 3.0A/phase stepper motor microstepping driver with step and direction inputs, DIP switch settable step mode (full, half, eight and sixteenth--S3/S4), torque (100%, 75%, 50%, 20%--S5/S6) ,work current (0-3A--SW1/SW2/SW3) and decay mode (0%, 25%, 50% and 100%). MD430-HZ
2. Features
1) Single-chip motor driver for sinusoidal microstep control of stepping motors
2) Power on in indication led
3) 3Amps-34Volts(Supply voltages:12-34DC)
4) Full step, half step, eight step and sixteenth step(selection with dipswitches)
5) Torque (100%, 75%,50%, 20%)
6) Work Current (0-3A selection with SW1/SW2/SW3)
5 axis CNC Breakout board interface adapter board
full support for MACH3, KCAM4, EMC2, the PC software to support parallel port control;
Stepper Motor
General Specification:
Step angle accuracy:+ - 5%(full step,not load)
Resistance accuracy: + - 10%
Inductance accuracy:+ - 20%
Temperature rise: 80deg Max(rated current,2 phase on)
Ambient temperature -----------20deg ---- +50deg
Insulation resistance:100ohm Min,500VDC
Insultion Strength--------500VAC for one minute
Datasheet (23HS8430B,front shaft is 8mm diameter shaft,21mm lenth,back shaft is 6.35mm dia and 10mm length,270oz-in or 18kg.cm holding torque)
Switching power supply
350W 24V/10 A,single output switching power supply
