Product Review

DIRECTIONS FOR USE: 1) Turn off the water supply. Flush the toilet to drain all of the water from the tank. 2) Remove the overflow/overfill tube from the top of the flush valve. 3) Unscrew the top holding the flush valve tower from being removed. Remove the tower. 4) Grab the old seal and pull gently in a circular motion to free it. Remove the old seal. 5) Replace the old seal with the new seal. As you do so, work around the bottom of the flush valve in a circular motion to seat the new seal in the groove. 6) Replace the tower, screw the top piece back on, replce the overflow/overfill tube and turn the water back on. You're all set! Perfect replacement for Mansfield (TM) flush valve seals for models 210 and 211 flush valves (watersaver flush valves). Equivalent to part 630-0030 (flush valve service kit). Rubber seal gaskets wear out over time and need to be replaced - replacement creates better flushing pressure and results in a quieter, leak-free toilet. No one wants a loud or hard to flush toilet! Installation is simpler than you'd expect, and does not require you to remove the base of the toilet. Pack of 2 for a great value! Our toilet gaskets are made from high-quality, durable rubber, our gaskets hold up against chlorine and other chemicals in the water supply. This is a generic product manufactured and distributed by Impresa Products (TM). This is not a Mansfield (TM) OEM product and Impresa Products has no affiliation with or endorsement from this brand. Our product is not covered under any other manufacturer's warranty (except for Impresa Products). The Mansfield (TM) brand name and logos are the registered trademarks of their owners. Any use of the Mansfield (TM) brand names, model or any other related designations are made solely for purposes of describing and illustrating compatibility.