Product Review

Instructions (more details please download the English User Manual in the Product Information):
Time Setting: Short press "SET" to enter the time setting mode, and the T1 LED digit tube will flash, press the "UP" & "Down" to set the time "T1", then short press the "SET" again, the T2 LED digit tube will flash, press the "UP" & "Down" to set the time "T2", here are two ways to save the setting, one is wait 6s and the module will save the parameter automatically, the other way is to shore press "SET" again to save.

Working Mode Setting: long press "SET" to enter the working mode setting and includes P0, P1, P2.
1) PO--0 means the timing unit is 0.1s;
2) PO--1 means the timing unit is second;
3) PO--2 means the timing unit is minute;
4) PO--3 means the timing unit is hour;
5) P1--0 means delay T1 time then the relay close (T1 timing);
6) P1--1 means delay T1 time then the relay open (T1 timing);
7) P1--2 means delay T1 time then the relay close (T1 timing), and delay T2 time then the relay open (T2 timing);
8) P1--3 means delay T1 time then the relay open (T1 timing), and delay T2 time then the relay close (T2 timing);
9) P1--4 means delay T1 time then the relay close(T1 timing), and delay T2 time then the relay open(T2 timing) and repeat this process
10) P1--4 means delay T1 time then the relay open (T1 timing), and delay T2 time then the relay close (T2 timing) and repeat this process;
P2--0 to P2--5 is the LED display brightness adjustment.
P2--OFF: low power consumption mode, the module will automatically turn off the LED display after 10s and press any kep to turn it on.

"OK" key function:
1) after finishing all the parameter setting, press "OK" to save the parameter. During the working process, press the "OK" to pause the working mode and the relay will open, press again to work;
2) Trigger again function: when the module finish the working mode, press "OK" can restart this working mode.