You may add a reverse/forward switch ASIN B077CGLK4P that will work with this item. The link is here:

https://www.amazon.com/dp/B077CGLK4P

This is a brand new electric gear motor that has an extremely high t...

Buy Now From Amazon

Product Review

You may add a reverse/forward switch ASIN B077CGLK4P that will work with this item. The link is here:

https://www.amazon.com/dp/B077CGLK4P

This is a brand new electric gear motor that has an extremely high torque and is speed adjustable with a PWM (Pulse Width Modulating) controller.

The gear motor is measured to be 7 inch long and the motor itself has a diameter of 2.5 inches.
Drive shaft is a 3/8" shaft with 1 flat ("D" shaft) where flat to OD is 0.322" and the length of the shaft is 0.886" long.
Rated voltage of this gear motor is 13.5 VDC and maximum speed is 50 RPM.
Rated output load is 60 watts and output toruqe at 50 RPM is 6 N-m (4.4 ft-lb).
Mounting is based on M6 screw mounting.

The 12V DC PWM controller features a 5 inches(12.7 cm) long connection to its potentiometer.
The potentiometer has a on/off switch built-in with a knob.
There are connectors between the gear motor and the controller.
To run the gear motor in CW rotation, please connect motor's green connector to controller's red connector and motor's red connector to controller's black connector.
To run the gear motor in CCW rotation, please connect motor's green connector to controller's black connector and motor's red connector to controller's red connector.
The distance of the connection wires between the motor and the controller is 10 inches(25.4 cm).
The distance of the 12v connection wire is 46 in(116.8 cm) long.

  • Variable Speed Motor
  • PMDC Gear Motor
  • 12VDC Gearmotor
  • 12V PWM Controller

Similar Products

uxcell GA/GB 37mm diameter DC Geared Motor Mounting Bracket Holder 6mm Hex CouplingSingle V Grooved Pulley, 3/8"35 Roller Chain 10 Feet with 2 Connecting LinksPGN - #35 Roller Chain x 10 feet + Free Connecting LinkRioRand 12V-40V 10A PWM DC Motor Speed Controller with Knob-High Efficiency, High Torque, Low Heat Generating with Reverse Polarity Protection, High Current ProtectionBest Choice 8-Piece 1/2" Shank Silver and Deming Drill Bit Set in Aluminum Carry Case, High Speed Steel (HSS) | SAE Size 9/16" - 1" by 1/16th IncrementAUTOTOOLHOME 1/8" 3/16" 1/4" 5/16" 3/8" 1/2" high Speed Steel HSS 4 Flute Straight End Mill Cutter 5/32" 1/16" Set of 8RioRand 7-80V PWM DC Motor Speed Controller Switch 30AHigh Torque Turbo Geared Motor DC 12V Motor 2/3/5/610/20/30/40/62/100RPM (20 RPM)