Product Review

Specifications:
Products includes: 120pcs hot melt glun gun bar.
Material Main Ingredients:EVA resin, tackifying resin, wax, antioxidant and so on.
Size: diameter 0.27 inch/7mm, length 3.9 inches/100mm.
Color:transparent.
Softening point: 80 degrees or so.

Hot melt adhesive bar / hot melt adhesive rod storage safety should pay attention to what:
1. Ventilation, dry, cool place.
2. Hot melt adhesive rods melt to avoid touch the skin, so as not to burn together.
3. Equipment cleaning method: with 120 ℃ mineral oil or paraffin cleaning equipment, gel temperature does not exceed 150 ℃. Sealed to prevent moisture.

Use steps:
1. First clean adhesive surface of the object , and use the appropriate hot melt glue gun.
2. The glue rod from the hot melt gun end inserted. Sent to the barrel, through the power preheat 5-8 minutes, the trigger will be able to squeeze the sol, and can control the amount of outing glue.
3. If a stick is not exhausted at one time, then the stick does not have to be removed, the next time you can use the power preheat 5-8 minutes after the direct use.