Product Review

This is An adjustable equipment allows you to return the strut to the original camber position
after dismantling and re-assembling the suspension or to check the amount of camber change before re-installing.
In-Kind Shooting

Specification:
Measures the Camber and Caster angle on the wheel hub or brake disc
Suitable for accurate checking of the castor and camber angle
Has a simple leveling adjustment from -5 degrees to 5 degrees
Magnetic gauge attaches to the hub or disc brake
Allows adjustment to maintain correct wheel alignment and even tyre wear
Time and money saving device
Easy to read and convenient to operate

Simple Instruction:

How to use:
1. Remove the wheel alignment sensor (Clip tool), remove the tire;
2, The magnetic level gauge carefully on the side of the suction wheel disc brakes;
3, the water level was adjusted to zero;
4, install the required location specific parts;
5, use a special tool, with the degree of magnetic level gauge indication, adjust the positioning of the part to the desired measurement angle.
6, retest with locator If there is a little deviation, just to fine-tune the vehicle. (Usually a slight deviation does not cause fault location)

Simple Reminder:
If you need very detailed adjustment instruction, You may search "wheel alignment tool" on youtube. There are some video