Product Review

Glow In The Dark Heat Transfer Vinyl (white to green)
Size12"x36' (1x3ft)
Thickness:0.08mm PET Liner:0.1mm
Adheres to: Cotton,Uncoated Polyester,Cotton Blends Fabric
Do not use nylon, velvet, acrylic fabrics, leather, vinyl which will melt and ruin the materia
Vinyl loads easily onto conventional cutters. it's not only easy to weed, but binds well to fabric and has a neat, flexible finish. It is durable and will not fade even with multiple washes.
Instructions:
1.Create your design on computer. Mirror/Reverse your image design.2.Please remove a light yellow protect liner before cutting.Place vinyl (gloss side) onto cutting mat.
3.Adjust proper blade depth and cutting pressure.
4. Cut with the gloss side facing DOWN and the duller back of the vinyl facing up
5.Weed all of the excess slowly, leave the letters or graphics on sticky surface.
6.Place a cardboard to protect transferred image onto both sides of t-shirt.
7.Set a heat press machine 140-150 Degrees Celsius (305-320 Fahrenheit),Preheat about 5 seconds.
8.Prepress it only for 8-12 seconds at medium pressure on gloss side(no steam iron).
(If you use a home iron, press it with firm pressure )
9.Disperse the heat of iron evenly.Consistently apply pressure so the whole image is fully attached and prevent image lifting or bubbling up and cracking.
10.Wait for the vinyl to cool and gently peel off backing after few minutes.
Care Instructions:
Hand wash your fabric gently with mild detergent
Wait 24 hours after application
Turn the article of clothing inside before washing
No bleach
Tips:
We recommend you to DO A TEST CUT BEFORE YOU BEGIN YOUR PROJECT.
If have any problem or question of vinyl, please contact us first, Vinyl Frog will try our best to deal with it for you at the first time.