Product Review
If you notice excessive noise when opening or closing your garage door, your overhead door rollers have physical wear, or they periodically pop off the track, it is time to replace them with the ABN White 7/16-Inch Shaft Garage Door Nylon Rollers 10-Pack. They are quiet and will not shake your walls. You will go from announcing to your block every time you leave the house to full stealth-mode. The sealed bearing garage door rollers are made of nylon that is softer and quieter than plastic or metal rollers. The ball bearings reduce rotational friction, and the lubrication groove disperses grease. Each roller has a hardened steel 13-ball bearing encasement that is stronger than a standard bearing. This package includes 10 garage rollers with stems (lubrication recommended, not included). WARNING: This product can expose you to chemicals which is [are] known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
- REPLACE NOISY GARAGE DOOR ROLLERS: Use the ABN White Garage Door Hardware Nylon Garage Door Rollers 10 Pack to make your garage door quiet, smooth, and straight when opening and closing; Chuck your old, noisy, or broken sectional, track-style garage door parts rollers and replace them with these innovatively-designed nylon rollers for garage door
- SIMPLE TO INSTALL: Method 1 – Slightly bend track at seam to remove, replace roller, and move door to do next roller (repeat on other side); Method 2 – Remove screws that attach brackets to your door, secure cable before releasing bottom brackets that are under cable spring tension, clamp cable to track, slide out old rollers, place new rollers in their place, and screw in backers; We recommend a silicone-based spray lubricant on axle and bearings, reapply as needed (optional, not included)
- QUIET AND SMOOTH OPERATION: Garage door rollers replacement overhead garage door rollers are constructed from white nylon that is softer and quieter than plastic or metal rollers and smoother than original equipment (OE) garage door parts; 13 smooth ball bearings reduce rotational friction between roller and shaft and result in a quieter and smoother opening and closing of your garage door
- BUILT TO LAST: Heavy duty garage door rollers include a groove to disperse grease lubricating oil (optional, not included); Protective dust shield on top end of shaft just below wheel; Caged bearings also protect from dust and grime; "Sealed" so each roller has a hardened steel 13-ball bearing encasement that is stronger than a standard bearing; Manufactured to exceed the industry standard of 10,000 up and down cycles with a 50-pound load
- CONTENTS: Package includes (10) white garage door rollers 4 inch stem garage door replacement parts; Lubrication recommended, not included; Standard size for 2-inch (5.1cm) tracks; 4.6-inch (11.7cm) overall length with 4.1-inch (10.4cm) stem shaft, 0.5-inch (1.3cm) shoulder, 0.4-inch (1cm) shaft thickness, 0.5-inch (1.3cm) thick wheel, 1.75-inch (4.4cm) wheel diameter
