Product Review

Installation Directions
1.) Turn off power to your dishwasher in breaker box
(ABSOLUTELY CRITICAL TO AVOID SHOCK)
2.) Rotate lower access panel fasteners and remove them
3.) Remove access panel/sound dampening pad. Determine if the water supply
or power lines have enough slack to move the dishwasher. If not, you will need to
turn off water supply valve, disconnect water supply line from inlet valve & release
power line from junction box
4.) Open dishwasher door, remove the screws from the existing brackets (if present)
5.) You will next be moving the dishwasher. To do so, you may need to lower the
dishwasher by adjusting the leveling legs
6.) Carefully pull dishwasher a few inches away from the front of the cabinet
7.) Use pliers to pull up tabs in back of the bracket (if present). Pull out old brackets
8.) Insert new brackets. Use pliers to adjust the back tab to lock the brackets in place
9.) Slide the dishwasher back into the cabinet (readjusting the leveling legs, if necessary).
Replace the screws in your new brackets
10.) Reverse steps 3, 2 and 1.

This is a generic product manufactured and distributed by Impresa Products
This is not a Whirlpool, Sears, Kenmore, Amana, Jenn-Air, Crosley, Maytag
Roper, Magic Chef, Estate or Inglis OEM product and Impresa Products has no affiliation
with or endorsement from these brands. Our product is not covered under any
other manufacturer's warranty (except for Impresa Products). The Whirlpool,
Sears, Kenmore, Amana, Jenn-Air, Crosley, Maytag, Roper, Magic Chef,
brand names and logos are the registered trademarks of their owners.
Any use of the Whirlpool, Sears, Kenmore, Amana, Jenn-Air, Crosley, Maytag,
Roper, Magic Chef model or any other related
designations are made solely for purposes of description.