Product Review
WARNING: The included lug nuts extend past the face of the spacers. IT IS REQUIRED that the back of your wheels have small cavities (at least 2" width and 1/4" deep) in the mounting pad for installation of these spacers. These cavities are NEEDED so that the lug nuts and wheel studs can sit in this pocket. Verify this before purchasing. Message us for any questions before purchasing the item.
Compatible With:
2011-2016 Scion tC
2008-2016 Scion xB
Toyota
1995-2019 - Avalon
1992-2019 - Camry
1991-1995 - MR2
1999-2008 - Solara
1986-1998 - Supra
Lexus
1992-2019 - ES300 & ES330
2013-2019 - ES300h
2007-2019 - ES350
1993-2019 - GS300, GS350, GS400, GS430
2007-2019 - GS450h, GS460, GS F
2008-2019 - IS F
2006-2019 - IS250, IS300, IS350
1990-2000 - LS400
2001-2006 - LS430
2015-2019 - NX200t
2015-2019 - NX300h
1992-2000 - SC300
1992-2000 - SC400
2002-2010 - SC430
IMPORTANT - Must check before purchasing
- SAFETY / INSTALL WARNING: Do NOT install wheel spacer if your wheel studs or lug nuts make contact with the back of your wheels.
- Wheel Stud Length: Your vehicle's wheel studs need to be less than 15mm. If not, the back of your wheels need pockets long/wide enough for your studs.
- Fender Gap: Measure your wheel gap for clearance. You will need at least 15mm of fender clearance to prevent the wheel/tire from hitting the fenderliner.
- Fitment: Use the Applications list above. If your vehicle is not on the list, message us so we can help find the correct item.
Contact Us
Our experienced and knowledgeable staff are here to help with any questions or problems you may have. Simply copy and paste the following link to your browser:
https://www.amazon.com/ss/help/contact/?_encoding=UTF8&ref_=v_sp_contact_seller&sellerID=A23ID4AZTDBV78
